This is a 3.5" touch screen color display connects to the MINIPRO Dyno Electronic Board with the included 8" data cable, and lets you get your live data displayed without a PC.
The display shows you your live Voltage, Amperage, Wattage Temperatures, RPM, mAH used, and more! Since you can know your mAH after your session, you know approximately how much juice is left in your battery!
Features:
- Live Data Reading
- Max. Value storage for your Current Draw.
- 480 x 320 Resolution
- RGB 65K true to life colors
- Touch Screen
- Easy to install future firmware upgrades via microSD card
- Visual Area : 73mm(L) × 49mm(W)
Compatible with:
- MINIPRO Electric Motor Dyno
- MINIPRO Chassis Dyno
- MINIPRO Slot Car Dyno
Includes:
- 3.5" Touch Screen Display
- 200mm (8in) data cable
Instructions:
- Place the dyno in setup mode (firmware version 1.8 or later)
- Change Frequency to 5hz
- Select LCD for Port #1
- Save the settings and exit the settings
- Done!
*Touch LCD to reset the max current draw.
**Please note, if you like to use this display without your PC, you need to power the dyno board with an external battery or 5V power connected to the micro-usb port.**
